GepRC GEP-CW3

Производитель

GepRC

Категория

3'' frame

Тип рамы

CineWhoop

The GEP-CW3 Frame is designed by the GEPRC team with the greatest degree of noise reduction optimization. It is compatible with DJI Air Unit and Caddx Vista system, The GEP-CW3 Cinewhoop Frame can also be used with analog image transmission. The flight control mounting hole can be compatible with two sizes: 30.5 * 30.5mm & 20 * 20mm.

  • Brand: GEPRC
  • Item:GEP-CW3
  • Motor to Motor: 156mm
  • Internal diameter: 3inch
  • Camera size: 19~20mm
  • Propellers: 3inch
  • The hole size of Motor 9mm ( Compatible with 1408/1507/1805.5/2004Motor)
  • The hole size of FC:30.5*30.5mm & 20*20mm
  • hickness of Top Plate:2mm
  • Thickness of Arms: 2mm
  • Thickness of Bottom Plate: 2mm
  • Weight: 136.2 Grams

  • 1 x Top plate 2mm
  • 1 x Bottom plate 2mm
  • 2 x Cinewhoop Arms 2mm
  • 2 x Aluminum splints of camera(Left&Right)
  • 12 x Aluminum column (M2*3.5*26mm)
  • 2 x Aluminum column(M2*4*26mm）
  • 4 x Cinewhoop Guards (Left&Right)
  • 2 x Damping EVA Ring
  • 4 x（M2）Nuts
  • 12 x（M2孔）Washers
  • 14 x（M2*5mm）Screws
  • 4 x（M2*6mm）Screws
  • 22 x（M2*8mm）Screws
  • 16 x（M2*6mm）Screws
  • 4 x（M2*4mm）Screws
  • 4 x（M3*20mm）Screws
  • 4 x（ M2*25mm）Screws
  • 4 x（M3mm）Nylon Nuts
  • 2 x（M2mm）Nylon Washers
  • 4 x（M2*5mm）Nylon Column
  • 8 x（M2）Nylon Nuts
  • 4 x 3D print Landing cushion
  • 1 x 3D print mount of Antenna
  • 2 x（M25*250mm）Battery Straps
  • 2 x Antenna Tubes
  • 1 x Battery pad
Всего комментариев: 0

Оставить комментарий