GepRC GEP-STABLE V2 F4 35A Stack
GepRC
FC stack
STM32F405
MPU6000
20x20мм
35A
BLHeli_32
до 6s
600mW
5.8GHz
After four months of hard work, DUAL ICM 20689 gyroscope both work at the same time,The new F4 Mini 20X20mm Important to release.
There are three versions. We strongly recommend the F7 Dual ICM20689 version, which is a one-off improvement.
Version as follows，STABLE V2 F4 30A(BLS 30A+F4+5.8G 600mw ),STABLE V2 F4 BL32 30A (BL32 35A+F4+5.8g 600mw)，STABLE PRO F7 DUAL BL32 35A (BL32 35A+F7 DUAL ICM20689+5.8g 600mw), Pilots can choose as needed.
All three versions have a common feature that maximizes the minimalist layout structure, Highly integrated FPV required functions, perfect clean video output.
Innovative soft damping design to reduce flight control and gyroscope noise and reduce motor heat output
STABLE V2 F4 Flight Controller Specs：
- Model:STABLE F4 35A
- MCU: F405
- IMU: MPU6000 gyro/accelerometer (SPI)
- OSD: BetaFlight OSD w/ AT7456E chip
- Baro:NO
- BEC Output: 5V@3A
- Integrated LC Filter
- Firmware target: OmnibusF4SD
- Size: 26x26mm board, 20mm mounting holes (M2)
STABLE V2 F4 ESC BL32 2-6S 4in1 Specs：
- MCU:STM32F051
- Input:2-6s lipo
- Constant:35Amps
- Burst:45Amps
- Dimensions:31*31mm(including the power pads)
- Mounting Holes:20*20mm,M2
- Supports Dshot1200,Proshot,Oneshot,Multishot
- Current meter: Yes
- Target: GEPRC-BL32-4IN1
STABLE F4 5.8g 600mW VTX Specs:
- Input voltage: 5V
- Channel: 48
- Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 600mW
- Size: 24 * 26 mm
- Mounting Holes Dimension: 20mm x 20mm
- Connector type: MMCX Connector
- BEC Output：5V/1A for Camera of FC
- Weight: 2.3g
- Traditional button
- IRC Tramp protocol
– 1 x F4 Flight Controller
– 1 xBLheli_32 35A 2-6S ESC
– 1 x 5.8g 500mW VTX
– 1 x Antenna
– 1 x Capacitance
– 5 x cable set
– 4 x M2*28mm screw
– 16 x Soft silicone
Всего комментариев: 0